H₂S Removal Media

Iron Oxide Desulfurizer

Iron Oxide Desulfurizer is mainly used in hydrogen sulfide containing water gas, semi-water gas, coke oven gas, natural gas, liquefied gas, waste gas and oilfield associated gas for the industries of biogas, city gas, fertilizer, coking, citric acid, winery, metallurgy, textile, light industry, electronics and
environmental protection etc. This series of products also has the characteristics of simple equipment, convenient operation, strong adaptability and small bed resistance.

Specifications:

  1. Color and appearance: Yellow brown cylindrical particles
  2. Size (mm): Φ4~5.5╳3~15
  3. Strength (N/cm): ≥ 50
  4. Bulk density (kg/L): 0.70~0.80
  5. Specific surface area (m2/g): 80
  6. Porosity: 70%
  7. Breakthrough sulfur capacity:≥ 20%

(According to HG/T4354-2012 standard)

Working conditions:

  • Temperature: 10-80°C
  • Pressure: up to 8MPa
  • Water Saturation: Better to be 100% RH, at least >70% RH
  • Liquid water is strictly forbidden to be brought into the bed.
  • The bed height to diameter ratio is better to be ≥ 3.
  • The system does not require special heating and energy consumption, but outdoor vessels should have
    insulation protection to avoid gas overcooling in winter.
  • Note: The amount of desulfurizer required is determined by the following conditions: H2S concentration and
    gas flow, volume of desulfurization vessel, and desulfurizer replacement cycle
Scroll to Top